manualshive.com logo in svg
background image

3

IMPORTANT SAFETY INSTRUCTIONS

FOR YOUR  SAFETY

Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.

Do not operate the beverage center in the presense of
explosive fumes.

Avoid contact with any moving parts of the automatic ice
maker. (some models)

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after this beverage center is
unpacked. Children should 

NEVER 

use these items to play

with. Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.

PROPER DISPOSAL OF YOUR BEVERAGE CENTER

Risk of child entrapment

Child entrapment and
suffocation are not problems of
the past. Junked or abandoned
refrigerators or freezers are still
dangerous – even if they will sit
for “just a few days.” If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.

Before you throw away your
old refrigerator/ freezer:

Remove doors.

Leave shelves in place so children may not easily climb
inside.

Have refrigerant removed by a qualified service
technician.

ELECTRICAL INFORMATION

The beverage center must be plugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.

 The

power cord of the appliance is equipped with a three-
prong grounding plug for your protection against electrical
shock hazards. It must be plugged directly into a properly
grounded three-prong receptacle. The receptacle must be
installed in accordance with local codes and ordinances.
Consult a qualified electrician. 

Do not use an extension

cord or adapter plug.

If the power cord is damaged, it should be replaced by the
manufacturer, service technician or a qualified person to
prevent any risk.

Never unplug this beverage center by pulling on the
power cord. Always grip the plug firmly, and pull straight
out from the receptacle to prevent damaging the power
cord.

Unplug this beverage center before cleaning and before
replacing a light bulb to avoid electrical shock.

Performance may be affected if the voltage varies by 10%
or more. Operating this beverage center with insufficient
power can damage the compressor. Such damage is not
covered under your warranty.

Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent this beverage center from
being turned off accidentally.

Avoid connecting this beverage center to a Ground Fault
Interruptor (GFI) circuit.

 WARNING

 WARNING

 WARNING

 WARNING

 WARNING

Please Read All Instructions Before Using This beverage
center.

 WARNING

 WARNING

 WARNING

 WARNING

 WARNING

These guidelines must be followed to ensure that safety
mechanisms in this beverage center will operate properly.

IMPOR

IMPOR

IMPOR

IMPOR

IMPORT

T

T

T

TANT

ANT

ANT

ANT

ANT

Turning the Air Flow and
Temperature Controls to “0”
turns off the compressor
and prevents your
Beverage Center from
cooling, but does not
disconnect the power to the
light bulb and other
electrical components. To
turn off power to your
Beverage Center you must
unplug the power cord from
the wall outlet.

 WARNING

 WARNING

 WARNING

 WARNING

 WARNING

CO

2

 CANISTER SAFE HANDLING

CO

2

 canisters must be handled with extreme care. They

contain potentially hazardous high pressure
compressed gas.

ALWAYS

 connect CO

2

 gas canisters to a pressure

regulator.

NEVER

 drop or throw the CO

2

 canister.

NEVER

 connect gas canister directly to keg.

ALWAYS

 keep CO

2

 canisters in a cool place (70º or less)

and away from heat.

In case of CO

2

 leakage, ventilate and evacuate the area

immediately.

ALWAYS

 keep canister secured in an upright position.

Check the Department of Transportation (D.O.T.) test
date on the canister neck and do not use if older than 5
years.

Return outdated canister to your gas supplier for one
that is within the time limit.

Содержание 241666500























Отзывы: