background image

Record Your Model and Serial Numbers

Record in the space provided below the model and serial numbers. On all models, the
serial plate is located on the outside of the cabinet.

Model No.

Serial No.

Register Your Product

The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to the Frigidaire Company.

Packaging

Normal Sounds

Remove all packaging from inside the carton, along with any
inserts placed into the side louvers.

PACKAGING      INSERTS

Today’s high efficiency compressors
may have a high pitched chatter
during the cooling cycle. 

High pitched Chatter

Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation. 

Vibration

Pinging or Swishing

Droplets of water hitting condenser
during normal operation may cause
“pinging or swishing” sounds. 

Sound of Rushing Air

At the front of the unit, you may
hear the sound of rushing air
being moved by the fan. 

Gurgle/Hiss

“Gurgling or hissing” noise may be heard
due to refrigerant passing through
evaporator during normal operation. 

Product Registration 

Product Registration, Packaging & Normal Sounds

3

2009 Electrolux Home Products, Inc.

All rights reserved.

Содержание 2020215A0281









Отзывы: