6
Features
END OF CYCLE SIGNAL
A signal will sound at the end of the cycle and periodically
during
wrinkle release
(some models) if selected.
DRYING RACK (some models)
Use the drying rack to dry items which should not be tumble
dried.
Open the dryer door and remove the lint screen.
1.
Insert drying rack into the dryer drum. Place the front bar
2.
under the lip of the lint screen opening.
Place items to be dried on top of the rack. Weight should
3.
not exceed 10 lbs. Leave space between items, but do not
let items hang over the sides or through the grids. Do not
tumble other items when using the drying rack.
Select Timed Dry. Use only the Air Fluff/No Heat option for
4.
items containing plastic, foam rubber, rubber-like materials,
feathers or down.
When items are dry, remove the rack and replace the lint
5.
screen. If lint screen is not in place, tumbling items could
enter the exhaust system and cause damage to the dryer.
For step-by-step instructions on DOOR REVERSAL, re-
fer to the
Installation Instructions
supplied with this dryer.
DRUM LIGHT (some models)
The drum light will come on whenever the door is opened to
illuminate the drum during loading and unloading. Closing
the door turns off the light.
REVERSIBLE DOOR
Your dryer is equipped with a reversible door. The door can
be hinged on the right or left side.
Clean the lint fi lter after
every load.
Care and Cleaning
Before cleaning the dryer interior, unplug the electrical power cord to avoid
•
electrical shock hazards.
Do not use any type spray cleanser when cleaning the dryer interior. Haz-
•
ardous fumes or electrical shock could occur.
INSIDE
Clean the lint fi lter after every load. Lint build-up on the fi lter restricts air
•
fl ow, which causes longer drying times. The fi lter is located at the bottom
of the door opening. Remove by pulling straight up. Remove the lint and
replace the fi lter.
Occasionally a waxy build-up may form on the lint fi lter and/or moisture
•
sensing bars from using dryer-added fabric softener sheets. To remove this
build-up, wash them with warm, soapy water. Dry the fi lter thoroughly and
replace. Do not operate the dryer without the lint fi lter in place.
If the dryer drum becomes stained from noncolorfast fabrics, clean the
•
drum with a damp cloth and a mild liquid household cleanser. Remove
cleanser residue before drying the next load.
Every 18 months an authorized servicer should clean the dryer cabinet
•
interior and exhaust duct. These areas can collect lint and dust over time.
An excessive amount of lint build-up could result in ineffi cient drying and
possible fi re hazard.
To reduce risk of fi re or serious injury to persons or property,
comply with the basic warnings listed in the Important Safety Instructions and
those listed below.
- FIRE HAZARD -
A clothes
dryer produces combustible lint. The dryer
must be connected to an outdoors exhaust.
Regularly inspect the outdoor exhaust open-
ing and remove any accumulation of lint
around the opening and in the surrounding
area.
Place the front bar
under the lip of the lint
screen opening.
