16
The appliance is intended for keeping food stuff.
The appliance is heavy. Care should be taken when moving it.
If your machine has wheels, remember that they are only used to facilitate small movements. Do not
move it on longer journeys.
Never use the base, drawers, doors etc. to stand on or as supports.
To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or
put too much food in the crisper drawers.
Caution!
Care and cleaning
Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive
cleansers.
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
Installation Important!
This refrigerating appliance is not intended to be used as a built-in appliance
For electrical connection, carefully, follow the instructions given in this manual.
Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged.
Report possible damages immediately to the place you bought it. In this case retain packing.
It is advisable to wait at least 24 hours before connecting the appliance to allow the oil to flow back in the
compressor.
Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve
sufficient ventilation, follow the instructions relevant to installation. This refrigerating appliance is not
intended to be used as a built-in appliance.
Wherever possible the back of the product should not be too close to a wall to avoid touching or catching
warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to
installation.
The appliance must not be located close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
ENERGY SAVINGS
To reduce the power consumption of your device:
Install it in a suitable location (see "Installing your appliance").
Keep the doors open for as short time as possible.
Do not put hot food into your device.
Ensure the optimal functioning of your device by periodically cleaning the condenser (see "Routine
maintenance of your appliance").
Ensure the optimal functioning of your device by not allowing too much frost accumulate in the refrigerator
(defrost it when the frost thickness exceeds 5-6 mm).
Periodically check the door seals and make sure they always close effectively. If this is not the case,
