friendlyway empire 19, Руководство пользователя

Страница: 8 / 22

Manual friendlyway empire 19, version 1.02
8
4. Connecting the unit and placing it in service
The device has a socket and fuse for power supply as well as a LAN connector and two USB
ports. These connections are located at the bottom of the rear panel:
Lay the connection cables so that no one can walk on or trip over.
4.1. Connecting terminal to the power supply
You should only operate the device from a grounded alternating current socket for a 220-
240 V / 50 Hz power supply.
Connection:
Connect the device to the power supply with the power connection cord (included with
delivery).The device is ready for operation.
4.2. Connecting to the network
The network connection requires a trained staff that is also capable of making the required
communication settings.
4.3. Placing the PC in operation
After you have connected the device to the power supply, the computer will start and the operating
system will be loaded.
If you have bought the friendlyway empire with a terminal CPU, the demo version of the
PC-Sheriff software will be preinstalled on its operating system. This is a data recovery
and security solution allowing you to restore the operating system and your data to the
desired state. If you decide to use this software, call us at +49 89 959791-500 or email at
software-support@friendlyway.com
to get the permanent license key free of charge.