3. Mounting and requirements for the surrounding area
3.1. Requirements for the surrounding area
Your friendlyway d-sign 12" was specially developed for use in enclosed areas and has specific requirements
for the surrounding area:
• Permissible ambient temperature: 15 - 30°C
• No sources of warmth or heat (direct sunlight, heater) in the immediate vicinity, no direct effects of heat.
• No high relative humidity
The machine must only be operated under the environmental conditions listed above.
Please take this into consideration when selecting a place to set up the device.
3.2. Mounting
The d-sign 12’’ in its basic model is mounted in a wall. For mounting a corresponding wall break should be
prepared (312x248 mm).
Instructions on mounting into the wall:
1. Remove the front panel by using a slotted screwdriver as a lever.
2. Place the device in the wall and tighten the 4 hitches with a Phillips screwdriver until the housing is fixed.
3. Set the front panel in the housing and press on the front panel with a flat hand until the panel is caught.
Instructions on disassembling from the wall:
1. Remove the front panel by using a slotted screwdriver as a lever.
2. Loose the hitches with a Phillips screwdriver until they swivel into the housing.
3. Remove the housing from the wall.
Optionally, the d-sign 12" can be also mounted on a stand.
7
