26
Installation of outdoor unit
Step five: connect outdoor electric wire
1. Remove the wire clip; connect the power connection wire and signal control wire
(only for cooling and heating unit) to the wiring terminal according to the color;
N(1) 2 3 L1 L2 G
yellow-
green
yellow-
green
blue
brown
wire clamp
black
blue
brown
power cord
power connect wire
2. Secure the power connection wire and signal control wire with wire clip
(only for cooling and heating unit).
Note:
● After tighten the screw, pull the power cord slightly to check if it is firm
● Never cut the power connection wire to prolong or shorten the distance.
● The connecting wire and connection pipe cannnot touch each other.
● Top cover of outdoor unit and electric box assembly should be fixed by the
screw. Otherwise, it can cause a fire, or short circuit caused by water or dust
Install the over line pipe
wire pipe
Fixed nut
Finish
