En-2
Fig. 6 Remote Control Unit
H
MASTER CONTROL button
I
SET TEMP. / SET TIME buttons (
+
/
-
)
J
Signal Transmitter
K
TIMER button
L
FAN CONTROL button
M
START/STOP button
N
SLEEP button
O
SET button
P
SWING button
Q
ACL button
R
TIME ADJUST button
Rear side (Fig. 7)
S
TEST RUN
●
Touch the two metal contacts with a
metallic object to send the signal to
perform a test run.
●
Perform a test run only when installing the
air conditioner. If the signal to perform a
test run is received during normal
operation, the air conditioner’s thermostat
will malfunction.
●
If the signal to perform a test run is re-
ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.
●
To stop the test operation mode, press the
START/STOP button to stop the air
conditioner.
T
Remote Control Unit Display (Fig. 8)
U
Transmit Indicator
V
Clock Display
W
Operating Mode Display
X
T imer Mode Display
Y
Fan Speed Display
Z
Temperature Set Display
[
T imer Set Indicator
\
Temperature Set Indicator
●
Refer to the folded out page on the cover.
Fig. 1 Indoor Unit
1
Operating Control Panel (Fig. 2)
2
MANUAL AUTO button
3
Indicator Lamps (Fig. 3)
4
Remote Control Signal Receiver
5
OPERATION Indicator Lamp (red)
6
TIMER Indicator Lamp (green)
●
If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(See Page 12 Auto Restart).
7
SUPER QUIET Indicator Lamp (green)
8
SWING Indicator Lamp (orange)
9
Intake Grille (Fig. 4)
0
Air Filter (left)
A
Air Flow Direction Louver
B
Right-Left Louver
(behind Air Flow Direction Louver)
C
Drain Hose
D
Air Filter (right)
Fig. 5 Outdoor Unit
E
Intake Port
F
Outlet Port
G
Pipe Unit
