background image

Safety Requirements For Electric Appliances

Note:

Make sure that the Live wire or Zero line as well as the earth wire in the family power 

socket can not be wrong connected, there should be reliable and no short circuit in the 

diagram.

wrong connection may cause fire.

1. The power supply should be used the rated voltage and AC exclusive circuit,

the power cable diameter should be satisfied.

3. 

5. The appliance shall be installed in accordance with national wiring regulations. 

should be connected in fixed wiring. 

It should be reliably earthed, and it should be connected to the special earth device,
the installation work should be operated by the professional. 

The air switch must have the functions of magnetic tripping and heat tripping, in  order 

to  protect  the  short  circuit  and  overloading.

6.

Installation

2. 

Don't 

damage power cord.

4. The min. distance from the unit and combustive surface is 

5 feet.

An all-pole disconnection switch having a contact separation of at least 

 in all poles 

9 feet

1. Air conditioner

2.

needs to be properly grounded.

The yellow-green two-color wire in air conditioner is the grounding

wire and cannot be used for any other purpose.  Do not cut.

 requirements

Grounding

17

Содержание M09CH





























Отзывы: