37
920-198-00
FRR038
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
HEAT -> SET POINT
F
CONTINUOUS
AUTO
WAKE
M T W T F S S
FRR039
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
CONTINUOUS
AUTO
WAKE
M T W T F S S
FRR040
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
WAKE
M T W T F S S
If the system mode is set to AUTO (Heat-Cool Unit only), a 2nd temperature
labeled “Heat
Set Point” displays. Use
(UP) or
(DOWN) arrows
to increment/decrement the heat temperature. The other parameters
(SYSTEM, FAN SPEED, FAN MODE) cannot be changed on this screen.
The temperature range for AUTO mode must remain a minimum of 3
degrees apart at all times. If the high or low temperature is adjusted too
close to its counterpart, that temperature not being directly changed will
increase/decrease as needed to maintain the 3 degree spread. The user
presses
DISPLAY
ENTER
to advance to the next time period.
If the user selects FAN-Only mode, the temperature display is replaced by
the word FAN. Options for FAN-Only mode are: CONTINUOUS, adjust
the FAN SPEED; AUTO, fan speed varies depending on system needs.
If the user wants the air conditioner to power down for a period of time,
pressing
SYSTEM
a
fi
fth time will set the unit options to OFF and put the unit into
hibernation until the next scheduled period. This feature is available during
schedule setup only. In on-the-
fl
y use, the user just presses the power button.
FRR041
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
WAKE
M T W T F S S
If the user should decide they don’t want to use all four time periods for the
day, they can set any period to be skipped by pressing
SYSTEM
. This will blank
out the options and display the word SKIP. This can be undone by either
pressing
SYSTEM
again or pressing the
(UP) or
(DOWN) arrows.
The display defaults to the setting immediately prior to the user advancing
to SKIP. Press
DISPLAY
ENTER
, to continue on to the next time period.
Set Schedule – Away, Return, Night Periods
FRR042
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
A
AWAY
M T W T F S S
M
Each of the additional periods (Away, Return, Night) are programmed
identical to the programming for the Wake period. The appropriate
period identi
fi
er (Away, Return, Night) displays during each programming
sequence.
Once the user has programmed all four (4) time periods, the program goes
to the next day or day group. For example, if individual days are being
programmed, the program will go from Mon to Tues leading the user through
4 periods for Tues until it reaches the end of the week.
NOTE:
Day group sequence is as follows: Monday through Friday
(weekday), Saturday – Sunday (weekend), Monday through
Sunday (7-day), and individual days Mon
Tue
Wed
Thru
Fri
Sat
Sun.
Note that the process follows a continuous loop until the user decides to exit.
When the user has completed setting start times and options (or at any
point in the process) they can press
SCHEDULE
to toggle to the next day (or set of
days), or they can press and hold
SCHEDULE
for 3 seconds to save their changes
and exit the set schedule mode.
FRR043
SYSTEM
FAN
MODE
FAN
SPEED
SCHEDULE
BACK
DISPLAY
ENTER
<- COOL
ROOM TEMP
SET POINT
F
AUTO
AUTO
Schedule Mode Completed.
