To operate air conditioner with remote control
NOTE:
Remote control may vary in appearance.
NOTE:
Two AAA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
To turn the air conditioner on or off:
Press POWER.
To select the mode:
To select the fan speed:
Press FAN SPEED for High, Medium
or Low.
To raise the temperature:
Press the plus button to raise the temperature. Each time you
press or hold the plus button, the temperature will go up 1º until it
reaches 86°F (30°C).
To lower the temperature:
Press the minus button to lower the temperature. Each time you
press or hold the minus button, the temperature will go down 1º
until it reaches 64°F (18°C).
To set Timer for a 1- to 24-hour delay before air conditioner
is turned off (air conditioner must be On):
1.
Press TIMER. Indicator light on air conditioner control panel
will flash.
2.
Press the plus or minus button to change the delay time from
1 to 24 hours.
3.
Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, keeping previous
settings:
1.
Turn off air conditioner.
2.
Press TIMER. Indicator light on air conditioner control panel
will flash.
3.
Press the plus or minus button to change delay time (1 to
24 hours).
4.
Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, changing the
previous settings:
1.
Turn on air conditioner.
2.
Adjust Mode to Cool, Fan Only, or Power Saver.
3.
Adjust Fan Speed to High, Medium
or
Low.
4.
Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5.
Turn off air conditioner.
6.
Press TIMER. Indicator light on air conditioner control panel
will flash.
7.
Press the plus or minus button to change delay time (1 to
24 hours).
8.
Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
Press COOL, FAN or $ SAVER
5
