Reset the Filter Replacement Notification
Plug in the power cord and reset the filter notification by either of the two methods below:
1. Press the reset button “ ” on the remote control for 2 seconds
2. Press the reset button at the air quality sensor inlet for 2 seconds.
3. When the buzzer sounds one time, the filter reset
has been cleared and restarted.
11
FILTER REPLACEMENT
As a warning, the air quality sensor light starts to flash when one of the filters is almost full and has to
be replaced. When you do not replace and/or reset the filter replacement notification after your
second alert, the appliance will lock itself. See below:
First alert to change filter
Second
alert to change filter
The filter function will be relatively
weakened. The air quality light will
flash to remind users to change the
filter.
If filter is not replaced after the first
alert, the air quality light will flash
and buzzer will sound every 30
minutes to remind users to change
the filter.
Filter replacement lock
If you do not replace the filter after the first and second alert, appliance will
stop working. Power light and air quality light will flash with a continuous
beep.
If the appliance is locked:
1. Switch off the appliance (press and hold the on/off button) and unplug it.
2. Reset filter replacement notification and replace the filter.
see section below
