Friedman Runt-20, Инструкция по эксплуатации

Страница: 8 / 10

LEVEL SWITCH: A level pad for the XLR ouput.
SPEAKER OUT JACKS (2): Plug your speaker cabs in here. If using only one cabinet, connect to “USE FIRST” jack.
The Runt-20 has a built in dummy load in case you want to use the XLR output without having a speaker
connected.
IMPEDANCE SELECTOR SWITCH: Set to correct speaker load impedance that is connected to your amp.
HT FUSE: Only replace with designated fuse value, appropriate to the voltage in your country. If this blows, don’t
freak out too much. It’s most likely a bad power tube. We recommend you carry a few spare fuses and a spare
set of tubes when gigging. If the fuse continues to blow after swapping out the tubes email us for support at
FriedmanAmps@gmail.com and we’ll help you sort it out…
MAINS FUSE: Replace with 3 amp Slo-Blo (North American Voltage – 117V) or 1.5 amp Slo-Blo (Euro Voltage-
230V). This is located in the IEC Housing.
MAINS INPUT: Plug the supplied IEC power cord here (make sure the mains voltage is correct).
FRIEDMAN 5-YEAR LIMITED WARRANTY
Thank you for choosing Friedman. Friedman
manufactures some of the world’s most reliable
hand-wired, all-tube amplifiers and speaker
cabinets. Friedman takes great pride in an
extremely thorough testing procedure which is
implemented on each product prior to shipment.
In the unlikely event that you have a problem
with you amplifier, please refer to warranty
below. Friedman stands behind our products like
no other and we’re here to help you!
AMPLIFIERS:
Friedman offers a limited 5-YEAR
warranty to the original purchaser that a Friedman
amplifier will be free from defects in material and
workmanship. A dated sales receipt will establish
coverage under this warranty, PLEASE KEEP YOUR
PROOF OF PURCHASE TO USE YOUR WARRANTY.
This warranty does not cover service or parts to
repair damage caused by accident, neglect, abuse,
normal & wear, disaster, misuse, abuse, over-
powering, negligence, inadequate packing or
shipping procedures and service, repair or any
modifications to the product which have not been
authorized or approved by Friedman in writing.
ANY MODIFICATION TO THE AMPLIFIER WILL
VOID YOUR WARRANTY
. If this product is
defective in materials or workmanship as
warranted above, your sole remedy shall be repair
or replacement by Friedman as provided below.
CAUTION: Do NOT attempt to repair, modify or
service your amplifier by yourself!!!Please read
the instruction manual for all safety notifications,
warnings and instructions.
Friedman, like all tube
amplifiers, have extremely high voltages that can
cause serious injury or death. Do not remove the
chassis from the amplifier. All repair and service
work must be performed by Friedman or an
authorized service center of Friedman. ANY
UNAUTHORIZED REPAIRS WILL VOID YOUR
WARRANTY.
TUBES:
Friedman warrants the original purchaser
that the specific tubes used in Friedman will be
free from defects in material and workmanship for
a period of 90 days from the original date of
purchase. A dated sales receipt will establish
coverage under this warranty. This tube warranty
will automatically terminate 90 days after the
original retail sales date. This tube warranty is in
lieu of all other expressed warranties. If tubes fail
within the 90 day warranty period your sole
remedy shall be replacement of tubes as provided
below.
RETURN PROCEDURES:
In the unlikely event that a
defect occurs please email us at
FriedmanAmps@Gmail.com. In most cases we can
help you diagnose the problem via email. If a
product must be sent to us, please follow the
procedure outlined below.
•
Defective products must be shipped,
together with proof of purchase, freight