Friedman Runt-20, Инструкция по эксплуатации

Страница: 5 / 10

12. Cleaning – The amplifier should be cleaned
only as recommended by the manufacturer. Clean
by wiping with a cloth slightly damp with water.
Avoid getting water inside the amplifier.
14. Non-use Periods – The power cord of the
amplifier should be unplugged from the outlet
when left unused for a long period of time.
15. Object and Liquid Entry
– Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
16. Damage Requiring Service
– The amplifier should be serviced by qualified
service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled
into the amplifier; or
C. The amplifier has been exposed to rain; or
D. The amplifier does not appear to operate
normally or exhibits a marked change in
performance; or
E. The amplifier has been dropped, or the
enclosure damaged.
F. The amplifier needs tube replacement or
biasing
17. Servicing – The user should not attempt any
service to the amplifier beyond that described in
the operating instructions.
All other servicing should be referred to qualified
service personnel.
18. Ventilation – Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not
be placed in a built- in installation such as a
bookcase or rack.
19. Attachments – do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
20. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product.
21. Lightning – For added protection for this
product before a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent
damage to the product due to lightning and
powerline surges.
22. Replacement Parts – When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service
or repairs to this product, ask the service
technician to perform safety checks to determine
that the product is in proper operating condition.
24. FUSES – Always use the correct rating and type
of fuse as indicated on the rear panel. Note the
proper rating fuse is determined by the AC line
voltage in the country this unit is being operated.
25. AC SELECT SWITCH: This switch must be set to
match the AC line voltage in the country this unit
is being operated.
To change the setting, loosen (do not remove) the
two screws above and below the slide switch.
Temporarily move the protective cover strip and
slide the actuator to match the voltage in your
country. Place the protective cover strip back over
the switch and tighten the two screws.