INTRODUCTION
KIT CONTENTS
The PA4 Wired Intruder Alarm System contains the
following components.
1 x 4 Zone Control Panel
1 x Mains Adaptor
1 x External Siren
1 x External Siren Enclosure
2 x Passive Infra Red Movement Detectors
2 x Magnetic Contact Detectors
1 x 50 metres (approx) of 6 Core Cable
1 x Cable Clips and Fixings
Also included:-
Installation & Operating Manual
Window Warning Stickers
IMPORTANT
Please check all items are present BEFORE breaking
the packaging warranty seals. No claims for missing
parts will be accepted unless pack seals are in place
and intact.
EXTENDING THE PA4 ALARM SYSTEM
The following additional accessories are available to
enhance your system and provide further protection
and a higher level of security where required.
Important: The PA4 system can be expanded to
contain maximum of 7 PIR detectors.
Component
Order Code
Accessory Pack
comprising the following:
2 x Passive Infra Red Movement Detectors
2 x Magnetic Contact Detectors
25 metres (approx.) of 6 Core Cable
PU1
Passive Infra Red Movement Detectors
(Twin Pack)
PU2
Full details of these accessories are given on page 24.
External Siren Enclosure
EXIT
1. Check all windows and doors are closed.
2. a) Fullguard - Press 'Away' then 'Arm'.
or b) Partguard - Press 'Home' then 'Arm'.
3. Leave premises by entry/exit route.
ENTRY
1. Enter premises by entry/exit route.
2. Enter your 4 digit password. If a mistake is
made re-enter the correct passcode.
MAINS
CLEAR
24Hr
Zone 1
Zone 2
Zone 3
Zone 4
1
2
3
0
4
5
6
7
8
9
ARM
OMIT
RESET
HOME
ER
AWAY
Control Panel
2 x Magnetic Contact
Detectors
Mains Adaptor
2 x PIR Movement
Detectors
External
Siren
3
PA4 Alarm
