Libra + 150m Plug-in chime with push/converter
Thank you for choosing this Friedland product. Please use the following instructions to
ensure correct installation and use. Keep these notes in a safe place for future reference
.
Unpack your chime kit and identify the
following parts:
¬
●
Chime
●
Bell push/converter
●
CR2032 battery for bell push
●
Bell wire (for use with a wired push)
●
2 x fixing screws for push
●
Adhesive pad
You will need:
●
A 4mm cross-head screwdriver
●
A small flat bladed screwdriver
Checking pack contents
Before proceeding with the installation,
please note the following safety warnings:
¬
●
Always follow the manufacturer’s advice
when using power tools and wear suitable
protective equipment (e.g. safety goggles)
when drilling holes etc.
¬
●
Before drilling holes in walls, check for
hidden electricity cables and water pipes,
the use of a cable/pipe locater maybe
advisable if in doubt.
¬
●
When connecting the landscape
push/converter to other manufacturers’
equipment, check manuals and if necessary
consult the manufacturer regarding suitability
for the intended use.
Safety
The bell push supplied with this kit is pre-programmed to operate with the chime. You need to do the following to get started:
●
Open the bell push
●
Fit the push battery
●
Check the chime switch setting
●
Check the volume setting
●
Plug in the chime
When you operate the bell push, the chime will sound and the 1st Icon will flash. If you have additional
pushes or you want to assign a different icon to your push, you will need to follow the programming procedure.
Quick start
2
D942S 48342PL_Ed3 2/1/07 6:31 PM Page 3
