6 Operation
Rittal Support rail cutter MC3
We reserve the right to make technical modifications
11
EN
Fig. 7:
Cutting operation
To remove the cut support rail, move the gripping rail backwards fully to its
initial position (fig. 8, item 1).
Depending on the length of the workpiece, it might be necessary to swivel
the stop flap to the side (fig. 8, item 2); then remove the completed profile.
Fig. 8:
Support rail removal
Note:
To ensure an optimum cutting result and the correct functioning of
the unit, the shear blade and the eccentric lever must always be
well lubricated.
