Time (01)
dst (02)
Frt (03)
In t (04)
-
ItcS (05)
rF (06)
-
oPn (07)
clr (08)
-
uEe (09)
-
PFS
26
EN
Power failure
Note! A power loss longer than 12 hours may
require an adjustment of time and date. The
week program is affected if the clock is not
correctly set.
Settings
A
P
User menu
Select
Confirm
OK
Browse the menu options.
Confirm
OK
Description
Default
settings
Functions
Menu
options
For week program. Time and date.
Open window mode to save energy. If the
temperature drops more than 3 °C in one
minute, the control enters frost protection
mode for 15 minutes (see Temperature
mode). Unless the temperature drops
further, the control returns to previous set-
tings after 15 minutes.
For week program. Daylight saving/sum-
mer time and winter time.
For week program. No fan (fan off) in
reduced mode.
For PF Smart App. Linking the RF module
to the control.
Factory reset. Resets values to factory set-
tings.
For week program. The control learns
when it needs to start in order to reach a
certain desired temperature at a specific
time in the environment it is used.
Read version number.
Read internal temperature.
Set the following:
- hour (24 h)
- minute
- weekday: mon=1, sun=7
- day/month
- year
Increase/decrease with +/-.
Confirm every step with OK.
Switch between on (on) and off
(OFF) with +/-.
Confirm with OK.
Switch between on (on) and off
(OFF) with +/-.
Confirm with OK.
Switch between on (on) and off
(OFF) with +/-.
Confirm with OK.
Switch between on (on) and off
(OFF) with +/-.
Confirm with OK.
See separate manual for PF Smart
App.
Press OK to return to the menu.
Switch between no (no) and yes
(YES) with +/-.
To factory reset, choose yes by
pressing OK about 4 seconds
(countdown).
Press OK to return to the menu.
Must be set
if the week
program is
to be used.
On (on)
OFF (off)
On (on)
On (on)
