IHGB12SR,
IHGW12SR
IHGB15S/R
IHGW15S/R
IHGB22S/R,
IHGW22S/R
Voltage
230-240V~50Hz
230-240V~50Hz
230-240V~50Hz
Power
1200 W
1500 W
2200 W
Installation
Wall, Ceiling, flush mounted
Wall, Ceiling, flush
mounted
Wall mounting only
Wall Mounting Height
1,8
–
2,1 m
1,8
–
2,1 m
1,8
–
2,1 m
Ceiling Mounting Height
2,1
–
2,3 m
2,1
–
2,3 m
-
Electric Protection Class
I
I
I
Water Splash Proof Rate
IP65
IP65
IP65
Length of Cable
1,8 m
1,8 m
1,8 m
Dimensions L*W*H
585 x 170 x 80 mm
without bracket
900 x 170 x 80 mm
without bracket
900 x 170 x 80 mm
without bracket
I
NSTRUCTION FOR
IHGB/W12SR
Power on the unit
Standby mode
Set the time function
Plug in the device, the device
will sound 1 beep, the device is
in standby mode, the heating
status lamp is flashing.
Press the button
“standby” on the
remote control, the
device will sound 1
beep and revert to
Standby mode, the
Stand-by lamp is
flashing.
Press the Timer
control button
”1hr”,
to activate 1-hour
delay-off timer
function. The heating
status lamp will turn
to green.
Press the button
“ON” on the
remote control, the device
starts to heat, and the heating
status lamp will turn in red.
Power off the unit:
Unplug the device from
the socket or press the
switch or the circuit
break to power off the
device
The device will be
switched off after 1
hour, and revert to
standby mode.
CAUTION: There is a built in safety feature that will automatically trigger the heater to go into
standby mode after eight hours of continuous operation. When this happens, the stand-by
lamp will be flashing.
EN
11
Heating status lamp
