Frick QUANTUM HD UNITY, Руководство по обслуживанию

Страница: 21 / 64

QUANTUM™ HD UNITY SYSTEM CONTROLLER
MAINTENANCE
090.670-M (APR 2020)
Page 21
Battery Replacement
The battery is fully accessible but is surrounded by sensi-
tive electronic components, so take care when changing.
Replace the battery using the following procedure:
1. Power off the panel.
2. Put on an anti-static wrist band and connect it to the
ground wire in the lower left corner of the processor
board.
3. Locate the battery socket.
4. Carefully insert a small screw driver between the bat-
tery socket and battery. Gently apply upwards pressure
prying the battery out of the socket.
5. Place the new battery into the socket in the same ori-
entation as the old battery, the side with writing facing
out.
6. Carefully apply pressure down to seat the new battery.
7. Power up the panel and wait until the Quantum HD ap-
plication has loaded.
8. Navigate to the Panel settings page to set the correct
date and time.