11
KLPWSECU kit (vintage option).
When the water pressure level is over than 2,8 bars, you have to use a water pressure limiter
!
(1)Connect the drain
Connect the drain tube (Ø 16) to the end of the elbow
using the collar provided.
(2) For Vintage models,
Connect the water supply to the HGR% humidifier.
The use of a KLPWSECU kit is essential when the water
pressure is greater than 2.8bar.
(1)
(2)
Cellar interior
A
B
C
D
E
E
F
G
H
A
KLPWSECU
Secure connection kit for HGR% humidifier
A:10 m of flexible 1/4" polyethylene tubing
B:An overflow safety valve
C:A 1/4" 1/4" isolation valve
D:A 1/4" pressure relief valve
E:Three fittings 1/4" 20/27
F:One Y 1/4"-1/4"-1/4"
KLPR20
20 m extension kit
G: 20 m of flexible 1/4" polyethylene
tubing
H: One nipple 1/4 "
Maximum cold water pressure
10 bar at 21°C
20/27 F
Genesis-Vintage
MPCG
Installation
On vintage models you will need to connect a klpwsecu kit, on the Out and IN-OUT configurations
it will first be necessary to put the connector E and the tube D on the device before fixing the duct frontage.
(Refer to page 15 for the cutting of the holes for the passage of the supply tube).
