22
Update/Stand: 11.2017
EN
• Connect the saddle connection hose with the spiral hose.
• Connect the saddle connection hose and spiral hose to the VACUBOX XL
and to the connection point on the saddle as shown in Figs. 3 and 5.
• For the processing of the spigot saddles the hose section with coupling
NW 7.2 is then connected to the plunger (Fig. 4 and Fig. 5).
• For the processing of the repair saddles the hose section with coupling
NW 7.2 is
not connected. The clutch is closed when not connected.
Fig. 3
Fig. 4
Fig. 5
NOTICE
Use only the original hose!
The VACUBOX XL should only be connected to the compressed air source using the
original hose. If other components are used, this may possibly lead to increased
pressure drop and thus minimizing the vacuum performance.
• Connect the VACUBOX XL and the air compressor using the compressor
connection hose.
• Check all connections of the system for correct and tight seating.
• Place the VACUBOX XL on a dry and clean surface with the inscription
facing upward.
WARNING!
Discharging air can cause injuries!
Make sure that the air outlet of the VACUBOX XL is always unobstructed and does
not expel air in the direction of the operator or into dust and dirt. Do not look into the
air outlet when the VACUBOX XL is in operation. Wear protective clothing!
