4901 EAST 12th St / Oakland / California 94601 / T: 510.535.5113 / F: 510.535.5237 / friant.com
MID ZONE
SEATING MANUAL
ASSEMBLY GUIDE
1. Assemble the Base, Casters, Gas Lift & Dust Cover
Insert five casters [F] into the base. Push hard until you feel or hear
the caster [F] snap into place. With the base [E] upright and the
casters [F] on the floor, insert the gas lift [D] into the base [E]. Then,
put the dust cover [K] on the gas lift [D].
3. Assemble the Armrest & Seat
Attach the armrests [C] to the seat assembly [B] using the adjusted
width button [G] to fasten the armrests over the seat assembly [B].
2. Assemble the Seat & Back
Keep the seat assembly [B] on a table first, then insert the back
assembly [A] between connected seat assembly [B] and seat plane.
Turn the back assembly [A] into the center of three holes. Attach
using a wrench [J]. Fully tighten the inner hexagon socket screws [H]
and flat pad [I].
4. Assemble the Seat & Gas Lift
Insert the seat assembly [B] with the armrests into the gas lift [D].
