Fri-Jado TDR5-M, Руководство пользователя

Страница: 18 / 32

TDR-M
EN 18 / 32
4.3.2 Loading the rotisserie using V-shape spits (accessory)
If you are using V-shape spits act as follows:

Place the skewer into the small outside hole on the rotor end plate on your left (as you face
the oven). The back of the V-shape spit should be pointing towards you.

Fit the other end on the spit into the small corresponding holes on the rotor end plate on your
right (as you face the oven).

Make sure the spit is level. If spit is not level make sure you are using the correct holes on
the rotor end plates.
4.3.3 Loading the rotisserie using meat baskets (accessory)
If you are using meat baskets, act as follows:

With the TDR 5 you must stick the ends of the meat baskets through the appropriate holes of
the rotor disks.

With the TDR 7 and TDR 8 you must attach the meat baskets to the appropriate pins.
type for TDR-8 is shown

Whilst loading the unit with meat baskets, you must see to it, that the rotor gets evenly
loaded, so that the mass of the products is evenly spread over de rotor, causing an equal
balance.

Also see to it that no meat parts are sticking out of the baskets.