Fri-Jado COLD DELI CD 3 Self, Руководство по обслуживанию

Страница: 8 / 68

REMOVAL AND REPLACEMENT OF PARTS
Service Manual Cold Deli CD3/4/5 form 9123583 rev.4/2015 Page 8
ELECTRONIC BALLAST FOR LIGHTING
1. Remove the left panel according to prior
procedure.
2. Disconnect the wiring to the electronic
ballast.
3. Remove the screws securing the electronic
ballast and remove it.
4. Reverse the procedure to install.
Note: The screws are located underneath the
wiring.
Note: For better access it might be required
to remove the middle panel as well.
1. Remove the left and right hand panel ac-
cording to prior procedure.
2. Remove the left and right back panel by
lifting them out of the hinges.
3. Remove the socket screws that secure the
middle panel and turn the panel towards
yourself.
4. Loosen the blocking clips on the sides
of the thermostat and remove the ther-
mostat.
5. Disconnect the wiring.
6. Reverse the procedure to install.
Note: Set all parameters in the new ther-
mostat.
THERMOSTAT DANFOSS EKC 102C