BY
PROGRAMMING THE iLOFT MONITOR
The monitor will not function until it has been programmed.
Option 1: From Panel + Monitor
< 2 min. 30 sec.
1º.
With the monitor connected, press the programming button «PROG
» for 2
seconds (to access this, you must lift up the front cover). A confirmation tone will sound.
2º.
Press the call-to-residence button. Again a confirmation is made with a different call tone.
Note:
The time between steps 1 and 2 must be less than 2 and half minutes.
Option 2: From the Monitor
You can program the monitor via the on-screen menu.
1º.
Enter in the User menu. Press «Menu» 1 second.
User Menu
Note: If the monitor is not yet programmed, press
«Menu» for 1 second
, and directly access the
«ADMINISTRATOR Menu», see the next page.
(*)
Function available depending on model.
Page 7
(*)
2
1
2 secs
MENU
1"
1
