Maintenance and service
Switch off mains supply before making any electrical connections. If in any doubt contact a
qualified electrician.
For any maintenance operation which is not simply cleaning the exterior of the extractor fan, the casing
assembly must be taken out of its housing as indicated in point 1 of the installation instructions. Then the
two reducer tubes (V) must be removed. (see Fig. 3)
To remove casing assembly:
1. Loosen 8 screws (x)
2. Gently separate reduce cones (V) from chassis.
The motor, fan and all the components must be regularly inspected to ensure that they are not dirty nor have
suffered any damage. The frequency will depend on its operating conditions.
During the maintenance sessions remove any dirt collected on the fan blades and the internal parts of the
frame to avoid any imbalance in operation which would lead to a reduction of the aerodynamic qualities and
possible damage to the motor. Never submerge the appliance in water or in any liquid.
Do not use solvents to clean the appliance. The motor bearings need no maintenance.
RATING/SPECIFICATIONS
For all electrical power and IP ratings refer to the fan rating and wiring label.
Recycling
The product is marked with the WEEE symbol, which indicates that it must not be disposed of with
household waste, but must be recycled at a suitable recycling location in the local municipality. Fresh AB is a
member of Sweden’s national recycling system, in accordance with the European WEEE directive.For more
information, see www.fresh.eu
Guarantee
The fans have a five year warranty against manufacturing defects. Complaints made to the place of
purchase.
Distributed by:
Fresh AB
Gransholmsvägen 136, SE-360 32 Gemla
Tel +46 (0)470 707700
www.fresh.eu
X
X
X
V
V
Fig 3
077587C Rev B
Edition 2016
