Before the engine can be started,
the ball pump # 1 must be used
to pump gasoline from the tank
to the carburettor.
At the same time the tipper # 2
is pressed on the carburettor.
Pump each per carburetor for
one second.
Immediately before starting,
switch on the ignition.
Now sit in the trike, activate the
Ignition Switch and start the
engine by means of electric
starter with the starter button
with no throttle. If necessary,
repeat this procedure.
In case you have pumped to
much fuel into the carb, start the
engine with 1/3 throttle.
# 1
# 2
