manualshive.com logo in svg

Fresh Breeze Relax 22, Руководство пользователя, Страница: 5 / 20

Поделиться
Скачать
Fresh Breeze Relax 22 Скачать руководство пользователя страница 5

5

m²

29,32

m

12,35

Streckung ausgelegt

A/R

5,2

Nr

54

m²

25

m

9,6 7

A/R

3,74

Kg

Kg

Nachgewiesene Tragwerksfestigkeit

Kg

430 bei 8 g Lastspitze

Kg

400 bei 6 g über 3 Sek unden

Kg

300 bei 8 g über 3 Sek unden

V-Trimm

Km/h

50**

V-Max.

Km/h

>60**

* abhängig von technischen Daten des Trikeherstellers

** Abweichung aufgrund unterschiedlicher Abflugmasse möglich

Trim´s System:

The Relax has a trimmer system that changes the angle of attack of the glider and thus increases the speed

.

The trim system extends the C and D risers and thus reduces the angle of attack of the paraglider.

In normal flight, all straps are the same length (38 cm with linen locks). When the trim system was activated, 

the B straps would extend up to 2.5 cm, C straps by up to 6 cm, and the D straps by up to 12 cm. A-straps will not last longer.

It is recommended to set the trimmers sysmetrically at the start. At the instruction of the individual trike manufacturer 

is to be paid in any case.

Function of the trimmer

The trimmer can easily be operated even under high loads. The built-in pulley allows this.

The illustration shows the strap in the accelerated position.

To bring the strap to the unaccelerated position, the handle / ball 

(green arrow) is pulled down. Then all 4 straps are the same length.

For acceleration, the clamp buckle (orange arrow) is released slowly. 

The rear straps are longer and the paraglider flies faster.

Trimmposition fast

5. Technical info´s

Area

Relax 25

Relax 22

Span flat

5,2

26,39

11,71

Cells

Size projected

54

22

Span projected

9,17

A.R.

3,73

300

120

MTOW min.

MTOW max.

Содержание Relax 22





















Отзывы:

Нет отзывов