Service
Fresenius Medical Care
T688 Series
18
V1 Aug 2020
Leg Rest actuator removal / replacement
Figure 15. Leg Rest actuator Figure 16. Leg Rest actuator
•
To remove the Leg Rest actuator:
1. Apply the chair brakes.
2. Raise the chair to its highest position, if applicable.
3. Disconnect the mains power supply cable from the wall outlet.
4. Disconnect the actuator cable (
R
) (
Figure 15
).
5. Undo and remove the two bolts (
S
) and (
T
) located at each end of the actuator (
Figure 15-
16
).
6. Remove the Leg Rest actuator.
•
To replace the Leg Rest actuator:
1.
Insert the Leg Rest actuator.
2.
Replace the two bolts connecting the actuator to the frame.
3.
Connect the actuator cable.
Note. Recalibration is required after replacing the Leg Rest actuator.
Note. Check of prgramming is recommended only.
R
S
T
