©2014 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
PAGE 4
3. Install toilet body
Put up the water closet and make sure the two pieces of mounting screws are all through the
installing holes of water closet.Get the centre line of water closet aligned with the centre line on
the
floor and then put down the water closet gently.
Note: Make sure the pipe is through the 4 layers of sealing rubber spacer of connecting pipe
after installing the product.Otherwise it will have bad effect for flushing function.
a
Pipe
Sealing rubber
spacer
Connecting
pipe
Fix the product on the floor with screws (
F
)and plastic covers(
J
), then cover the decoration
caps(
I
).
b
Product
Plastic bracket
4. Connect water supply pipe and check sealing performance
Get the water supply valve and the water inlet with soft connecting pipe. ( If the fitting is
separared filter, please connect filter first) Turn on the water supply valve and make sure there
is no leakage for every joint. Fasten the nuts a little can prevent leakage.
a
Water supply valve
Waterproof spacer
Waterproof spacer
Waterproof spacer
Waterp inlet
Cistern
Filter
Soft pipe nut
Soft pipe
Soft pipe nut
I
F
J
