© Fresair, LLC.
Fresair.com
19 of 21
How to Install
Step 7 - Plumbing
What you’ll need:
Run water lines/tubes to the area(s) you’ve designated for fill and return water.
Connect the “in” hose on the water fill connector to your water supply and fill the
reservoir.
When you see water emerge from the “out” hose on the water fill connector the
reservoir is full.
Finally, power on your Fresair and ensure there are no leaks.
Additionally, test all functions to ensure your Fresair is working properly.
Supplied Water Lines/Tubes, Zip Ties, Water, *Plumbing tape
NOTE
Connections to water input and/or output outside of what is included in
this manual is not recommended nor is support offered for
recommendations, customizations, troubleshooting or likewise.
