© Fresair, LLC.
Fresair.com
16 of 21
Universal Bolt Hole
Figure 1
With the unit still in place and secure, use a permanent marker to draw an outline
around the outside base of the unit on the roof.
Remove the unit from the roof and turn the unit over.
Stick the thicker sealing foam tape around the airbox up to the honeycomb plastic
line. Cut the sealing foam tape to the correct length ensuring there are no gaps
where the sealing foam tape ends meet.
Apply a single bead of silicone along the middle of both the foam on the unit and
the foam on the roof
Carefully lower the unit back onto the roof being careful to align the bolt holes first
so the foam and silicone form a weathertight seal.
At the same time, make sure to bring wiring and tubing through the opening on the
predetermined side the wiring and tubing will run to meet their connections.
How to Install
Step 4 - Adhering the Sealing Foam Tape
What you’ll need:
Fresair Unit, Sealing Foam Tape
