freor VEGA QB HG, Руководство по эксплуатации

Страница: 9 / 36

9
and risk analysis are in accordance with explosion protection regulations (defined by
standard EN378-1).
Safety guidelines:
• Keep ignition sources away (heat, sparks, open flames, hot surfaces).
• Use a damp cloth or sponge to remove condensation water and for cleaning. Do
not use dry clothes or sponges to dry the unit. (Risk of electrostatic charge and
sparking)
• Before starting-up and restarting, fill the drain with approx. 2 litres of water.
Prevents carry-over of refrigerant into drains.
•
It is prohibited to cover any ventilation opening of the unit. Safe minimum
distance must be kept (between units) to ensure sufficient air access
• Do not use any mechanical devices or other means (e.g., ice scrapers) to
accelerate the defrosting.
• Do not use steam or high-pressure cleaners for basic cleaning.
• Only install the units in well-ventilated rooms.
• Do not install the units in cellars or lowered rooms.
• Do not damage the refrigerant circuit.
• Do not expose the unit to temperatures higher than 70°C during transport ation
and storage.
• Avoid transmitting pulsations and vibrations to the unit.
• Do not allow external forces to act on the appliance, e.g., careless handling with
a forklift or floor cleaning machine.
• Do not crush or bend pipes.
• Only qualified maintenance personnel may carry out work on the refrigerant
circuit.
• Only open the refrigerant circuit and suck off the refrigerant in well-ventilated
rooms outside store business hours (when customers are not present) or
outdoors.
•
Disconnect the unit prior to all maintenance, service, or repair work.
• Disposal of the unit must be performed following Waste & Disposal-Recycling
Regulations requirements
Failure to comply with safety requirements could lead to potential health injuries and
safety risks.
2.3. Material damage during prolonged shutdown
• Operate the appliance in a stable operating position (horizontal alignment).
• Operate the device only on the designated adjustable feet.
• Read the installation notes (see chapters 4.2 and 4.3)
• Do not operate the unit above the climate class specified on the technical data
sticker.