14
the treadmill runs smoothly and stops running and displays “End”. After 5 seconds, it stops to enter the
standby state; the countdown is set. The time is decremented to zero. When the countdown reaches 0:00,
the treadmill runs smoothly and stops running. The speed window displays “End”, and 5 seconds after the
complete stop, it enters the standby state.
5.“CAL./PUL.”window:
Show Calories:
The calorific value is displayed. When the calorie value is displayed, the positive count is from 0.0-
999.0. After overflow, it is cleared and recounted. When the count is reversed, it counts down from the set
value to 0. When the countdown reaches 0, the treadmill The steady down speed stops running and “End” is
displayed, and the standby state is entered 5 seconds after the complete stop. Heartbeat display:
The heartbeat value of the user is displayed. When the user holds the heartbeat sensor handle in both hands,
the system can automatically detect the heartbeat frequency of the user and display it in this window. The
heartbeat value display range is 50-200 beats/min. (This data is for reference only and cannot be used as
medical data.)
B.KEY BUTTON FUNCTION:
1.
“
PROG”
is the program key: In the standby state, press this button to cycle through “P01-P02-...- P12-
FAT”.
2.
“P01-P12”
is a built-in program.
3.
"FAT"
is a fat test.
4.
“MODE”
is the mode selection button: press this button to cycle through “0:00”, “30:00”, “1.0”, “50.0”
(“0:00” is manual mode, “15:00” is time) In the countdown mode, “1.0” is the distance countdown mode,
and “50.0” is the calorie countdown mode.) When selecting various modes, the speed and incline “ + or -”
keys can be used to set the relevant countdown value. After the setting is completed, Press the "START"
button to start the treadmill.
5.
“START”
is the start button: When the power is turned on and the safety lock is closed, press this
button at any time to start the treadmill.
6.
“STOP”
is stop button: This button can be used to stop the treadmill from running and reset to zero
during exercise.
7.
“SPEED+”,“SPEED-”
is Speed+/- button: When in standby state to adjust the set value. It is used
to adjust the speed after starting. The adjustment range is 0.1 km/time, and it automatically increases or
decreases continuously when it is held for more than 0.5 seconds.
8.
“”
、
“INCLINE-”
is /- button: When in standby state to adjust the set value.
It is used to adjust the slope after starting. The adjustment range is 1 segment/time. When it is continuously
pressed for more than 0.5 seconds, it will automatically increase or decrease continuously.
9.
“SPEED: 4,8,12”KM/H
is speed shortcut button: Speed settings can be made quickly.
10.
“INCLINE:4,8,12”%
is Incline shortcut button: Incline settings can be made quickly.
11. Entertainment function operation instructions:
The product is connected to the power supply. At this time, the MP3 audio source is inserted, and the
speaker can play MP3 music; insert the USB device, the product
The music in the USB will be played automatically;
Volume -
:
press this button to decrease the volume;
: press this
button to increase the volume;
Previous song:
Press this button
for the previous song;
Next song:
press this button for the next
song;
Play/Pause:
Press this button to play or pause music.
C.
QUICK START (MANUAL MODE):
1.
Turn on the power switch and properly attach the magnetic safety lock to the safety lock position under
the panel.
2.
Press the “START” start button, the system enters the 3 second countdown, the buzzer sounds,
