NOTICE
Do not tighten the tube fittings on the hard trans-
fer lines. Tightening the tube fittings can cause
tearing of the O-ring seal and increased fluid leak-
age.
10. Check the tube fittings on the hard transfer lines
of the gear, see
Fig. 4
, Item 15. If there is leak-
age from either of the fittings, replace the steer-
ing gear.
f462151
11
17
12
13
14
1
6
7
5
5
9
9
4
4
3
3
18
19
20
21
23
2
10
22
15
16
07/24/2009
8
8
1.
Steering Tie Rod Arm
2.
Power Steering Fluid Lines
3.
Large Bellows Clamp
4.
Bellows
5.
Small Bellows Clamp
6.
Driver-Side Outer Tie Rod
7.
Tie Rod Jam Nut
8.
Inner Tie Rod Flat
9.
Inner Tie Rod Ball Joint
10. Input Shaft Seal Cover
11. I-shaft Upper Yoke
12. I-shaft Lower Yoke Boot Clamp
13. I-shaft Lower Yoke Boot
14. I-shaft Lower End Yoke
15. Transfer Line Tube Fittings
16. Power Steering Fluid Line
Fittings
17. I-shaft Slip Joint
18. Transfer Lines
19. Rack and Pinion Gear
20. Pinch Bolt
21. Tie Rod Clamp
22. Tie Rod Clamp Nut
23. Passenger-Side Outer Tie Rod
Fig. 4, Rack and Pinion Steering System
Steering
46
Cascadia Maintenance Manual, August 2015
46/4
