freightliner BUSINESS CLASS M2, Руководство пользователя

Страница: 21 / 86

Daytime Running Lights
Switching on the ignition and releasing the parking
brakes automatically activates the daytime running
lights, if equipped. The daytime running lights will
operate until the parking brakes are applied or the
headlights are turned on.
NOTE: Daytime running lights are standard on
all Canadian vehicles.
The daytime running lights illuminate at about two-
thirds of normal power.
Marker Light Interrupt Switch
The marker light interrupt (MRKR INT) paddle switch
temporarily flashes the marker lights and taillights
(
Fig. 4.5 ). With the vehicle lights on, raise the paddle
to briefly turn off the marker lights and taillights. With
the vehicle lights off, raise the paddle to briefly turn
on the marker lights and taillights.
Turning off the vehicle lights automatically turns off
the marker lights. When the panel lights are on, the
marker light icon and MRKR INT legend are backlit
in green.
Road Light Switch, Optional
The road light (ROAD LAMP) rocker switch operates
the optional road lights, which are recessed into the
front bumper or mounted on the lower edge of a cut-
out in the center of the front bumper.
The low beam headlights must be turned on before
the road lights can be turned on. The road lights will
not illuminate if the high beam headlights are already
on, and switching from low beams to high beams will
switch off the road lights.
To turn the road lights on, press on the upper part of
the rocker (at the road light icon). See
Fig. 4.6 . To
turn the road lights off, press on the lower part of the
rocker (at the ROAD LAMP legend).
When the road lights are on, the road light icon is
backlit in amber. When the panel lights are on, the
ROAD LAMP legend is backlit in green.
Utility Light Switch, Optional
The utility light switch operates one of the following
lights or sets of lights:
•
A single round utility light swivel-mounted in
the center of the cab roof;
•
Two round utility lights mounted in fixed posi-
tions on each side of the cab roof;
•
Two flush-mounted utility lights mounted on the
back of the cab, one on each side.
To turn the utility light(s) on, press in on the upper
part of the utility light (UTLY LAMP) rocker switch
(
Fig. 4.7 ). To turn the utility light(s) off, press on the
lower part of the rocker (at the UTLY LAMP legend).
f610598 10/29/2001
Fig. 4.4, Panel Light Increase/Decrease Switch
05/09/2002 f610581
Raise the paddle to flash the marker lights.
Fig. 4.5, Marker Light Interrupt Switch
10/15/2001 f610582
Fig. 4.6, Road Light Switch
Controls
4.3