FreezyBoy 5300100020, Руководство пользователя

Страница: 45 / 52

45
EN
4 Setup
The appliance must be set up in line with the following instructions.
FreezyBoy ® is designed for indoor use. Do not put it outdoors.
For safety reasons, ensure that the air inlet vent is always at least 5 cm away
from the nearest surface. Never cover the air vents.
FreezyBoy
®
must always be standing on its own feet or on the raiser when
it is running.
4.1 Free-standing FreezyBoy
®
One
Keep the appliance out of direct sunlight.
Setup instructions
1. Place FreezyBoy
®
on a flat, level surface.
2. Place FreezyBoy ® on a flat, level surface.
The following additional parts are not required:
Raiser
Cable clamp
Support bracket
Mounting plate
Screw set
4.2 FreezyBoy
®
One in a drawer pull-out
Base unit width: at least 30 cm
Drawer pull-out with nominal length of at least 45 cm
Power connection 220-240 V
FreezyBoy ® can be combined with a waste bin
in a drawer pull-out. Depending on the height of the
waste bin, FreezyBoy ® can be installed with or
without the raiser.