Freewing Super Scorpion, Руководство пользователя, Страница: 9 / 28

Servo Introduction
2000 µs: : 2000 µs
I
.)
../
... /
A servo or reversed servo is defined as follows:
When the servo input signal changes from 1000ųs to
2000ųs ,
if the servo arm rotates clockwise , it's a positive servo .
If it rotates counter clockwise , it's a reversed servo .
EN
17g Digital servo
17g Digital servo
If you decide to purchase another brand of servo,
please refer to the following list to ensure that it is
correct size .
Servo installing position Servo No. Pos./Rev.
Servo
Cable Length
Nose gear steering servo
1
Positive
250mm
Aileron servo (Left)
2
Positive
500mm
Aileron servo (Right) 3 Positive
500mm
Flap servo (Left) 4 Positive
400mm
Flap servo (Right)
5 Reverse
400mm
Elevator servo (Left)
6
Reverse 100mm
Elevator servo (Right)
7
Positive
100mm
Rudder servo (Left)
8
Positive
100mm
Rudder servo (Right)
9
Positive
100mm
Battery Installation
Battery Hatch
Cover
�
Push back the lever to release the Battery
Hatch cover. Place the battery on the deck
and secure it with the Velcro strap.
Power up the radio, check to ensure that
the throttle is in the lowest position.
Engage the kill switch if one is assigned.
Super Scorpion
Item No.: FJ2D7
Version No.: FJ207-VD1
Servo connection instruction
1.Use a one to three-wire harness to connect to the No.1 No.8 No.9 servos.
2.Use Y-wire harness to connect to the No.2 No.3 servos.
3.Use Y-wire harness to connect to the No.4 No.5 servos.
4.Use Y-wire harness to connect to the No.6 No.7 servos.
-8-
Battery hatch size: 32Qx6?x55mm
Our standard battery is,
6S 22.2V 4000mAh 35C
The recommended battery capacity and discharge rate
advised is :
6S 22.2V 3700mAh ~ 6S 22.2V 5000mAh
Discharge rate of C
�
30C
Different weight battery may affect its CG, please
the correct range of CG indication.
Ensure that the receiver is bound to the radio!
Follow the instructions in your radio manual.