Freewing Super Scorpion, Руководство пользователя, Страница: 4 / 28

Wing Assembly and Installation
1. As shown in the photo, use glue to attach
the "9g servo box (C)" and "control surface
horn s (D)" to the main wing.
2. Put the 9g servo in the "9g servo box
(C)", and press the servo cable into the "main
wing trough (F)".
3. Place the" servo cover (B)" over the 9g servo
box (C)", and secure it with 2 "screws (A)"
4. Use" pushrod (E)" to connect the servo .
arm and control surface horn.
5.Adjust to center the aileron.
. \
A _______ ,
\
'
l-\
B
T
'
��-!
i ·\
EN
1
.__ _________
......__-=--------------------'
Main Wing Installation
,.,,--
-�
_,i
,
...
� ,
\
'
1. As shown in the photos above,
remove the wooden piece and apply glue
to the side of the left wing.
2. lnsert the carbon fiber tube into the left
and right wings, and push them together.
3. As shown in the photo to the right , use
the 6 screws to secure the main wing to the
fuselage.
Carbon Fiber tube size:
I
A
·t
f
\
8�
I
�
I
:
.
�-=
I
-3-
Super Scorpion
Item No.: FJ207
Version No.: FJ207-V01
I
�
r
'
{>/
•
I
.
-S:,,. •
/
f
,/
6pcs
/
------
•
D
�wtng·
Wing Servo Installation
A- Screws
(PWA1.7x5mm)
B- 9g servo cover
C- 9g servo box
D- Surface control horns
E- Pushrod
F- Trough
1.
2.
3.
As shown in the photo to the right, use glue
to attach the "9g servo box (C)" to the
fuselage and the "elevator control horn (D)
to the elevator.
Place the 9g servo in the "9g servo box (C)".
Place the" servo cover (B)" over the "9g servo
box (C)", and secure it with 2 "screws (A)".
Use "pushrod (E)" to connect the servo arm
to the elevator control horn.
4. Adjust the clevis to center the Elevator.
08x35Omm
Tube thickness
=
1 mm
Elevator Assembly
Installing the Elevator Servo
A-Screws (PWA1.7x5mm)
B - 9g servo cover
C - 9g servo box
D -Surface control horn E - Pushrod