FreeWave Technologies
August 13, 2004
2.4GHz Spread Spectrum Installation Guide
V3.7
LIG0002AC Rev A
9 of 12
Hardware Mounting Instructions
Mounting Instructions for I-Series Radio Transceiver in Ruggedized Enclosure
Qty Hardware
required:
4
4-40 x 1/4 Pan Head Screw
4
#4 Split Lock Washers
1.
Use a split lock washer on all four mounting screws.
2.
Locate and drill .140 Diameter holes (see
Figure 1 - the Bottom view
) in the sheet metal (panel,
bracket, etc.) that the enclosure will be mounted to.
3.
From the backside of the sheet metal, insert screws through the holes and into the mounting holes on
the enclosures bottom side.
4.
Tighten firmly.
