FreeWave Technologies
August 13, 2004
2.4GHz Spread Spectrum Installation Guide
V3.7
LIG0002AC Rev A
11 of 12
(Figure 1)
Mounting Instructions for I-Series Board Level Radio Transceiver
Qty Hardware
required:
4
4-40 x ¾ Standoff
8
4-40 x ¼ Pan Head Screw
8
#4 Split Lock Washers
1.
Use a split lock washer on all eight mounting screws.
2.
Locate and drill .140 Diameter holes (see
Figure 2 for Radio mounting hole dimensions
) in the sheet
metal (panel, bracket, etc.) that the transceiver will be mounted to. Align the holes in accordance to
the mounting holes in the transceiver.
3.
From the backside insert screws through the holes and into a standoff for mounting the transceiver.
4.
From the top of the transceiver, insert screws through the holes and into a mounted standoff.
5.
Tighten firmly.
