Freetech P6F163, Руководство пользователя

Страница: 64 / 76

Mainboard User’s Manual
Power Management Setup
56
Modem Ring Resume : When set to “Enabled,” any activity on the
Modem port will wake up the system from a power saving mode. The
options are “Enabled” and “Disabled” (default).
RTC Alarm Resume : When this item enabled, your can set the date
and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode. The default is “Disabled”.
Data (of Month) : This item selects the alarm date. Key in a
DEC number : Min=0, Max=31.
Resume Time (hh:mm:ss) : This item selects the alarm time.
[hh] : Key in a DEC number:Min=0, Max=23.
[mm/ss]: Key in a DEC number:Min=0, Max=59.
Primary INTR : Press Enter to on/off the wake up ability of a
specified IRQ. In the following is a list of IRQ’s, Interrupt Requests,
which can be exempted much as the COM ports and LPT ports above
can. When an I/O device wants to gain the attention of the operating
system, it signals this by causing an IRQ to occur. When the
operating system is ready to respond to the request, it interrupts itself
and performs the service. When On mode exist, activity will neither
prevent the system from going into a power management mode nor
awaken it.
IRQ3 (COM 2 )
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 ( PS / 2 Mouse )
IRQ13 (Coprocessor)