8
SHARK CLASSIC TIDE XL 600
Instruction Manual
TO TURN ON/OFF THE ALARM
1. Press the S3 MODE button until it shows the ALARM display.
2. Press the S1 TIDE button to toggle between ALARM 1 and ALARM 2.
3. Press the S2 RESET button to turn on the alarm. The alarm frequency setting will appear.
4. Press the S2 RESET button again to turn off the alarm. The message “OFF” will be displayed.
WHEN THE ALARM GOES OFF
A 20-second alarm tune will be emitted and the backlight will flash. To stop the tune, press any button.
If the alarm tune is done without any user interruption, the watch will automatically
enter a snooze mode. The alarm will go off one more time after 5 minutes.
TO SET TIME 2 AND CALENDAR
1. Press the S3 MODE button until it shows the TIME 2 display.
2. Press and hold the S4 SET button for approximately 4 seconds. The message “SET TIME-2”
will be displayed and the year digits will blink. Use the S1 TIDE button and S2 RESET button to increase
or decrease the digit.
3. Press the S3 MODE button, the month will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
4. Press the S3 MODE button, the date will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
5. Press the S3 MODE button, the hour will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
6. Press the S3 MODE button, the minutes will blink. Use the S1 TIDE button and S2 RESET button
to increase or decrease the digit.
7. Press the S4 SET button to confirm.
NOTE: In TIME 2 mode, only the year, month, date, hour, and minute can be set.
All other settings are synchronized between NORMAL TIME and TIME 2.
TO USE THE BACKLIGHT
Press the S5 LIGHT button to turn on the backlight for approximately 3 seconds.
