3
SHARK CLASSIC TIDE 600
Instruction Manual
TO SET THE TIDE MODE
1. Press the S3 MODE button to select TIDE mode. The corresponding name and number of your favorite
beach will be displayed.
2. After approximately 2 seconds, one of the four data display modes will display, based on the display
mode left on during the last browsing via S4 SET button: TIDE STATUS GRAPH, DATA OF NEXT TIDE,
SUNRISE TIME, SUNSET TIME.
3. In any of the four display modes, press and hold the S4 SET button for approximately 4 seconds
and the message “SET TIDE LOCATION” will be displayed and the number of your favorite tide location
will blink. Use the S1 TIDE button or S2 RESET button to cycle through your favorite tide locations
and select a tide location to set.
4. Press the S3 MODE button and the continent entry will blink. Use S1 TIDE button or S2 RESET button
to cycle through the options and select the desired continent.
5. Press the S3 MODE button and the country entry will blink. Use S1 TIDE button or S2 RESET button
to cycle through the options and select the desired country.
6. Press the S3 MODE button and the regio’s entry will blink. Use S1 TIDE button or S2 RESET button
to cycle through the options and select the desired region.
7. Press the S3 MODE button and the beach entry will blink. Use S1 TIDE button or S2 RESET button
to cycle through the options and select the desired beach
8. Press the S3 MODE button and the DST (Daylight Savings Time) option will blink.
Use the S1 TIDE button or S2 RESET button to choose between ON or OFF.
NOTE: This option refers to the location of the beach you have selected, not your current location.
9. Press the S3 MODE button and the tide offset minutes will blink. Use the S1 TIDE button
or S2 RESET button to increase or decrease the number of minutes in increments of 10 for the offset.
This feature is used to create a custom location based on the nearest programmed beach location.
10. Press the S3 MODE button and the custom location will blink. Use the S1 TIDE button
or S2 RESET button to choose between YES or NO for the custom beach.
If No is selected, press the S4 SET button to confirm.
If YES is selected, the first character of the 18-character name will blink. Use the S1 TIDE button
or S2 RESET button to cycle forward or backward through the alphabet to select
the correct letter. Press the S3 MODE button to advance to the next letter. Repeat to complete
the name of the custom beach.
11. Press the S4 SET button to confirm.
