©
2009
7
STEP 5
l
Attach two foot pedal brackets (80) to the left pedal bar (5L), securing with four cross
head screws (46).
l
Attach the left foot pedal (33L) to the left pedal bar (5L), securing with three hex head
bolts (49), three flat washer (64) and three nylon nuts (53).
l
Attach the front of the left pedal tube (5L) to the left bottom handlebar (6L) using
one
allen head bolt (51), one flat washer (66) and one nylon nut (67).
l
Attach two protective covers (32) to the right and left side of the left pedal bar (5L),
securing with four cross head bolts (46).
l
Repeat for right side.
46
32
1
6R
46
51
32
STEP 6
l
Attach the stationary handlebar (8) with handpulse (21) to the bracket on the upright
post (4). Secure using two allen bolts (47) and two spring washers (59).
Note:
It will be necessary to move the handpulse wire (22) around the upright post and
away from the monitor bracket to avoid pinching the wires.
4
22
47
47
21
59
8
59
PDF created with pdfFactory trial version
www.softwarelabs.com
