©
2009
6
STEP 3
l
Connect the extension sensor wire (23) from the upright post (4) to the sensor
w/wire (24) from the main frame (1).
l
Connect the extension gear box wire (81) from the upright post (4) to the gear box
w/wire (25) from the main frame (1).
l
Connect the extension power wire (83) from the upright post (4) to the power wire (82)
from the main frame (1).
l
Insert the upright post (4) into the main frame (1). Secure using six allen bolts (47) and
six spring washers (59) and six curved washers (58) which are pre-assemble on the
upright post (4). Hand tighten only.
24
58
59
47
47
59
23
6L
4
6R
82
58
59
47
83
STEP 4
l
Attach the right pivot shaft (11R) from the right pedal bar (5R) to the opening of the right
crank (10R)
l
Attach the left pivot shaft (11L) from the left pedal bar (5L) to the opening of the left
crank (10L).
NOTE:
The right pivot shaft is a right hand thread, you need to tighten it clockwise. The left
pivot shaft is a left hand thread, you need to tighten it counter-clockwise
11R
11L
5L
10L
1
5R
6R
PDF created with pdfFactory trial version
www.softwarelabs.com
