Freescale Semiconductor NXP DEMO9S08JS16, Краткое руководство пользователя

Страница: 5 / 8

DEMO9S08JS16—Quick Start Guide
1. Insert the provided DVD into the computer.
A menu will appear.
2. Select the appropriate board and click “Install
CodeWarrior Development Studio
for Microcontroller 6.2.1 patch.”
3. Follow the on-screen instructions until
installation is complete.
4. Select the appropriate board and click “Install
MS9S08JS16 Service Pack”
5. Follow the on-screen instructions util installation
is complete.
After the CodeWarrior 6.2.1 patch and JS16
service pack are installed, the MC9S08JS16
silicon can be selected when creating the
application, and the JS16 project can be
compiled correctly.
Install DEMO Code
(based on USB-MINI stack)
for MC9S08JS16
Freescale USB-MINI stack for MC9S08JS16
is a complimentary stack with the appropriate
JS16 USB Device mode low-level drivers
and top-level HID class and CDC class
examples. To exercise the various USB
examples packaged with the stack, follow
the step-by-step DEMO9S08JS16 Labs
document (DEMO9S08JS16LAB) included
in the “Training” section of the DVD. Stack
installation is a one-time required step before
developing applications with this software.
1. Insert the provided DVD into the computer. A menu
will appear.
2. Click “Install JS16 USB Demo.” This will launch
the stack installer.
3. Follow on-screen instructions until installation
is complete.
DEMO9S08JS16—Quick Start Guide
STEP
3
Install Bootloader GUI
MC9S08JS16 supports a USB bootloader.
The user’s application code can be downloaded
(updated) using the USB bootloader or BDM
debug port. If the USB bootloader is adopted,
a friendly PC GUI must be installed. This GUI
works with the USB bootloader located in boot
ROM to transfer and program the firmware
(s19 code) to MC9S08JS16’s flash memory.
The installation of a PC GUI is a one-time step
before the USB bootloader is used.
1. Insert the provided DVD into the computer. A menu
will appear.
2. Select the appropriate board and click on “Install
Bootloader GUI.”
3. Follow the on-screen instructions until installation
is complete.
The CodeWarrior compiles and links the
MC9S08JS16 project to generate the s19
code. The s19 code can be selected by the
bootloader GUI and programmed to the
MC9S08JS16 flash. For more information
about USB bootloader, please refer to
“MC9S08JS16 USB bootloader GUI user
guide” in the DEMO9S08JS16 DVD.
STEP
4
Install PEmicro
Demo Board Toolkit
PEmicro Embedded Multilink Toolkit
includes graphical utilities that run on your
computer and help speed up your application
development. These utilities take development
beyond the hardware and interact with the
target microcontroller over the same USB
multilink reference design on the board that
allows you to debug using CodeWarrior. Best
of all, you can debug your microcontroller
in CodeWarrior while simultaneously using
one of the following utilities: Logic Analyzer,
Serial Grapher and Terminal Window. PEmicro
Embedded Multilink Toolkit installation is a
one-time required step.
STEP
5