1. Determined according to JEDEC Standard JESD22-A103,
High Temperature Storage Life
.
2. Determined according to IPC/JEDEC Standard J-STD-020,
Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices
.
4.2 Moisture handling ratings
Symbol
Description
Min.
Max.
Unit
Notes
MSL
Moisture sensitivity level
—
3
—
1. Determined according to IPC/JEDEC Standard J-STD-020,
Moisture/Reflow Sensitivity Classification for Nonhermetic
Solid State Surface Mount Devices
.
4.3 ESD handling ratings
Symbol
Description
Min.
Max.
Unit
Notes
V
HBM
Electrostatic discharge voltage, human body model
-6000
+6000
V
V
CDM
Electrostatic discharge voltage, charged-device model
-500
+500
V
I
LAT
Latch-up current at ambient temperature of 105°C
-100
+100
mA
1. Determined according to JEDEC Standard JESD22-A114,
Electrostatic Discharge (ESD) Sensitivity Testing Human Body
Model (HBM)
.
4.4 Voltage and current operating ratings
Absolute maximum ratings are stress ratings only, and functional operation at the
maxima is not guaranteed. Stress beyond the limits specified in below table may affect
device reliability or cause permanent damage to the device. For functional operating
conditions, refer to the remaining tables in this document.
This device contains circuitry protecting against damage due to high static voltage or
electrical fields; however, it is advised that normal precautions be taken to avoid
application of any voltages higher than maximum-rated voltages to this high-impedance
circuit. Reliability of operation is enhanced if unused inputs are tied to an appropriate
logic voltage level (for instance, either V
SS
or V
DD
) or the programmable pullup resistor
associated with the pin is enabled.
Symbol
Description
Min.
Max.
Unit
V
DD
Supply voltage
–0.3
5.8
V
I
DD
Maximum current into V
DD
—
120
mA
V
DIO
Digital input voltage (except RESET, EXTAL, and XTAL)
–0.3
V
DD
+ 0.3
V
Table continues on the next page...
Ratings
MC9S08PA60 Series Data Sheet, Rev. 1, 10/9/2012.
6
Freescale Semiconductor, Inc.
