Freescale Semiconductor KIT33926PNBEVBE, Руководство пользователя

Страница: 6 / 25

KT33926UG, Rev. 2.0
6 Freescale Semiconductor
Installing SPIGen Freeware on your Computer
9 Installing SPIGen Freeware on your Computer
There current version of SPIGen is designed to run on a USB enabled computer with Windows XP,
Windows 2000, or Windows NT.
This version of SPIGen includes a README.txt file which will describe the operating systems where the
software should be installed. Before you install the program, refer to the SPIGen README.txt file to check
the compatibility of the installation program and your computer operating system.
To install the software from the CD-ROM, insert the CD-ROM into your CD drive. Click the Start button,
and then click “Run…”.
While running Windows NT, Windows 2000, or Windows XP, type
“D:\SPIGen_Win_NT_2000_XP\Setup.exe” in the box, and then click “OK”.
Several temporary files will be copied to your computer, and then the Installation Wizard will guide you
through the rest of the process.
To use SPIGen, Go to the Windows Start menu, then Programs, then SPIGen, and click on the SPIGen
icon. The SPIGen “Generic SPI Generator” graphic user interface (GUI) will appear. Go to the File menu
in the upper left hand corner of the GUI, and select Open, then browse the CD to find and select the
SPIGen Configuration “.spi” file for the EVB you are using. Click Open, and SPIGen will open a
specifically configured SPI command generator for your EVB.
Figure 3. SPI Generator GUI